lab-07: gate level model for 32-bit register

Gate level implementation for the following components:
- SR_LATCH
- D_LATCH
- D_FF
- REG1
- REG32

TESTBENCH/register_file_tb.v

@@ -68,19 +68,17 @@ no_of_pass = 0;
 // Write cycle
 for(i=0;i<32; i = i + 1)
 begin
-#10     DATA_REG = i * 10; READ=1'b0; WRITE=1'b1; ADDR_W = i;
+#10     DATA_REG=i; READ=1'b0; WRITE=1'b1; ADDR_W = i;
 end
 
 #5 READ=1'b0; WRITE=1'b0;
 // test of write data
 for(i=0;i<32; i = i + 1)
 begin
-#5      READ=1'b1; WRITE=1'b0; ADDR_R1 = i; ADDR_R2 = i % 7;
+#5      READ=1'b1; WRITE=1'b0; ADDR_R1 = i; ADDR_R2 = i;
 #5      no_of_test = no_of_test + 1;
-        if (DATA_R1 !== i * 10)
-	    $write("[TEST @ %0dns] Read %1b, Write %1b, expecting %8h, got %8h [FAILED]\n", $time, READ, WRITE, i * 10, DATA_R1);
-        else if (DATA_R2 !== (i % 7) * 10)
-	    $write("[TEST @ %0dns] Read %1b, Write %1b, expecting %8h, got %8h [FAILED]\n", $time, READ, WRITE, (i % 7) * 10, DATA_R2);
+        if (DATA_R1 !== i)
+	    $write("[TEST @ %0dns] Read %1b, Write %1b, expecting %8h, got %8h [FAILED]\n", $time, READ, WRITE, i, DATA_R1);
         else 
 	    no_of_pass  = no_of_pass + 1;
         result[ridx] = DATA_R1; ridx=ridx+1;
@@ -88,23 +86,6 @@ begin
         
 end
 
-// Testing read and write at the same time
-for(i=2;i<16; i = i + 1)
-begin
-#5      DATA_REG = 20; READ=1'b1; WRITE=1'b1; ADDR_W = i + 1; ADDR_R1 = i; ADDR_R2 = i * 2;
-#5      no_of_test = no_of_test + 1;
-        if (DATA_R1 !== 20)
-	    $write("[TEST @ %0dns] Read %1b, Write %1b, expecting %8h, got %8h [FAILED]\n", $time, READ, WRITE, 20, DATA_R1);
-        else if (DATA_R2 !== i * 20)
-	    $write("[TEST @ %0dns] Read %1b, Write %1b, expecting %8h, got %8h [FAILED]\n", $time, READ, WRITE, i * 20, DATA_R2);
-        else
-	    no_of_pass  = no_of_pass + 1;
-        result[ridx] = DATA_R1; ridx=ridx+1;
-        result[ridx] = DATA_R1; ridx=ridx+1;
-
-end
-
-// TODO: Read and write from the same address at the same time?
 
 #5    READ=1'b0; WRITE=1'b0; // No op
 

logic.v

@@ -127,19 +127,7 @@ output [31:0] D;
 // input
 input [4:0] I;
 
-wire [15:0] half;
-wire I_not;
-not I_inv(I_not, I[4]);
-
-DECODER_4x16 d(half, I[3:0]);
-
-genvar i;
-generate
-    for (i = 0; i < 16; i = i + 1) begin : d5_gen
-        and msb0(D[i], I_not, half[i]);
-        and msb1(D[i + 16], I[4], half[i]);
-    end
-endgenerate
+// TBD
 
 endmodule
 
@@ -150,19 +138,7 @@ output [15:0] D;
 // input
 input [3:0] I;
 
-wire [7:0] half;
-wire I_not;
-not I_inv(I_not, I[3]);
-
-DECODER_3x8 d(half, I[2:0]);
-
-genvar i;
-generate
-    for (i = 0; i < 8; i = i + 1) begin : d4_gen
-        and msb0(D[i], I_not, half[i]);
-        and msb1(D[i + 8], I[3], half[i]);
-    end
-endgenerate
+// TBD
 
 
 endmodule
@@ -174,19 +150,8 @@ output [7:0] D;
 // input
 input [2:0] I;
 
-wire [3:0] half;
-wire I_not;
-not I_inv(I_not, I[2]);
+//TBD
 
-DECODER_2x4 d(half, I[1:0]);
-
-genvar i;
-generate
-    for (i = 0; i < 4; i = i + 1) begin : d3_gen
-        and msb0(D[i], I_not, half[i]);
-        and msb1(D[i + 4], I[2], half[i]);
-    end
-endgenerate
 
 endmodule
 

mux.v

@@ -27,16 +27,7 @@ input [31:0] I16, I17, I18, I19, I20, I21, I22, I23;
 input [31:0] I24, I25, I26, I27, I28, I29, I30, I31;
 input [4:0] S;
 
-wire [31:0] x0, x1;
-MUX32_16x1 mux16_0(x0, I0, I1, I2, I3, I4, I5, I6, I7,
-                       I8, I9, I10, I11, I12, I13, I14, I15,
-                       S[3:0]
-);
-MUX32_16x1 mux16_1(x1, I16, I17, I18, I19, I20, I21, I22, I23,
-                       I24, I25, I26, I27, I28, I29, I30, I31,
-                       S[3:0]
-);
-MUX32_2x1 out(Y, x0, x1, S[4]);
+// TBD
 
 endmodule
 

register_file.v

@@ -41,31 +41,6 @@ input [`REG_ADDR_INDEX_LIMIT:0] ADDR_R1, ADDR_R2, ADDR_W;
 output [`DATA_INDEX_LIMIT:0] DATA_R1;
 output [`DATA_INDEX_LIMIT:0] DATA_R2;
 
-// module REG32(Q, D, LOAD, CLK, RESET);
-// module DECODER_5x32(D,I);
-
-// module MUX32_32x1(Y, I0, I1, I2, I3, I4, I5, I6, I7,
-                     // I8, I9, I10, I11, I12, I13, I14, I15,
-                     // I16, I17, I18, I19, I20, I21, I22, I23,
-                     // I24, I25, I26, I27, I28, I29, I30, I31, S);
-
-wire [31:0] Q [31:0];
-wire [31:0] write;
-DECODER_5x32 d_write(write, ADDR_W);
-
-REG32 r[31:0] (Q, DATA_W, write, CLK, RST);
-
-MUX32_32x1 r1(DATA_R1, Q[0], Q[1], Q[2], Q[3], Q[4], Q[5], Q[6], Q[7],
-                     Q[8], Q[9], Q[10], Q[11], Q[12], Q[13], Q[14], Q[15],
-                     Q[16], Q[17], Q[18], Q[19], Q[20], Q[21], Q[22], Q[23],
-                     Q[24], Q[25], Q[26], Q[27], Q[28], Q[29], Q[30], Q[31],
-                     ADDR_R1
-);
-MUX32_32x1 r2(DATA_R2, Q[0], Q[1], Q[2], Q[3], Q[4], Q[5], Q[6], Q[7],
-                     Q[8], Q[9], Q[10], Q[11], Q[12], Q[13], Q[14], Q[15],
-                     Q[16], Q[17], Q[18], Q[19], Q[20], Q[21], Q[22], Q[23],
-                     Q[24], Q[25], Q[26], Q[27], Q[28], Q[29], Q[30], Q[31],
-                     ADDR_R2
-);
+// TBD
 
 endmodule