misc: fix unconnected port warnings for ALU and TWOSCOMP

Gate level implementation for the following components:
- DECODER_5x32
- MUX32_32x1
- REGISTER_FILE_32x32

Additional tests added in register file testbench.

TESTBENCH/register_file_tb.v

@@ -68,24 +68,53 @@ no_of_pass = 0;
 // Write cycle
 for(i=0;i<32; i = i + 1)
 begin
-#10     DATA_REG=i; READ=1'b0; WRITE=1'b1; ADDR_W = i;
+#10     DATA_REG = i * 10; READ=1'b0; WRITE=1'b1; ADDR_W = i;
 end
 
 #5 READ=1'b0; WRITE=1'b0;
 // test of write data
 for(i=0;i<32; i = i + 1)
 begin
-#5      READ=1'b1; WRITE=1'b0; ADDR_R1 = i; ADDR_R2 = i;
+#5      READ=1'b1; WRITE=1'b0; ADDR_R1 = i; ADDR_R2 = i % 7;
 #5      no_of_test = no_of_test + 1;
-        if (DATA_R1 !== i)
+        if (DATA_R1 !== i * 10)
-	    $write("[TEST @ %0dns] Read %1b, Write %1b, expecting %8h, got %8h [FAILED]\n", $time, READ, WRITE, i, DATA_R1);
+	    $write("[TEST @ %0dns] Read %1b, Write %1b, expecting %8h, got %8h [FAILED]\n", $time, READ, WRITE, i * 10, DATA_R1);
+        else if (DATA_R2 !== (i % 7) * 10)
+	    $write("[TEST @ %0dns] Read %1b, Write %1b, expecting %8h, got %8h [FAILED]\n", $time, READ, WRITE, (i % 7) * 10, DATA_R2);
         else
 	    no_of_pass  = no_of_pass + 1;
         result[ridx] = DATA_R1; ridx=ridx+1;
-        result[ridx] = DATA_R1; ridx=ridx+1;
         
 end
 
+// Testing read and write at the same time
+for(i=2;i<16; i = i + 1)
+begin
+#5      DATA_REG = 20; READ=1'b1; WRITE=1'b1; ADDR_W = i + 1; ADDR_R1 = i; ADDR_R2 = i * 2;
+#5      no_of_test = no_of_test + 1;
+        if (DATA_R1 !== 20)
+	    $write("[TEST @ %0dns] Read %1b, Write %1b, expecting %8h, got %8h [FAILED]\n", $time, READ, WRITE, 20, DATA_R1);
+        else if (DATA_R2 !== i * 20)
+	    $write("[TEST @ %0dns] Read %1b, Write %1b, expecting %8h, got %8h [FAILED]\n", $time, READ, WRITE, i * 20, DATA_R2);
+        else
+	    no_of_pass  = no_of_pass + 1;
+        result[ridx] = DATA_R1; ridx=ridx+1;
+
+end
+
+// Test reading when READ=0
+#5     READ=1'b0;
+#5     no_of_test = no_of_test + 1;
+if (DATA_R1 !== 32'bx)
+        $write("[TEST @ %0dns] READ=0, expecting DATA_R1 to be 32{x}, got %8h [FAILED]\n", $time, DATA_R1);
+else if (DATA_R2 !== 32'bx)
+        $write("[TEST @ %0dns] READ=0, expecting DATA_R2 to be 32{x}, got %8h [FAILED]\n", $time, DATA_R2);
+else
+no_of_pass  = no_of_pass + 1;
+result[ridx] = DATA_R1; ridx=ridx+1;
+
+// TODO: Read and write from the same address at the same time?
+// TODO: Write when WRITE=0 should be tested
 
 #5    READ=1'b0; WRITE=1'b0; // No op
 

alu.v

@@ -44,7 +44,7 @@ wire [31:0] res,
 // can use oprn[1] or oprn[3] for SnA
 wire SnA;
 or (SnA, OPRN[1], OPRN[3]);
-RC_ADD_SUB_32 addsub(.Y(res_addsub), .A(OP1), .B(OP2), .SnA(SnA));
+RC_ADD_SUB_32 addsub(.Y(res_addsub), .CO(), .A(OP1), .B(OP2), .SnA(SnA));
 buf slt [31:0] (res_slt, {31'b0,res_addsub[31]});
 
 // shift_r = xx0100
@@ -54,7 +54,7 @@ buf slt [31:0] (res_slt, {31'b0,res_addsub[31]});
 SHIFT32 shift(res_shift, OP1, OP2, OPRN[0]);
 
 // mul = xx0011
-MULT32 mul(.LO(res_mul), .A(OP1), .B(OP2));
+MULT32 mul(.LO(res_mul), .HI(), .A(OP1), .B(OP2));
 
 // and = xx0110
 // or  = xx0111
@@ -63,11 +63,12 @@ AND32_2x1 and32(res_and, OP1, OP2);
 OR32_2x1 or32(res_or, OP1, OP2);
 NOR32_2x1 nor32(res_nor, OP1, OP2);
 
-MUX32_16x1 out(.Y(res), .S(OPRN[3:0]),
+MUX32_16x1 out(.Y(res), .S(OPRN[3:0]), .I0(),
                .I1(res_addsub), .I2(res_addsub), .I3(res_mul),
                .I4(res_shift),.I5(res_shift),
                .I6(res_and), .I7(res_or), .I8(res_nor),
-               .I9(res_slt)
+               .I9(res_slt),
+               .I10(), .I11(), .I12(), .I13(), .I14(), .I15()
 );
 
 // or bits of result for zero flag

logic.v

@@ -20,7 +20,7 @@ output [63:0] Y;
 //input list
 input [63:0] A;
 
-RC_ADD_SUB_64 twoscomp64_sub(.Y(Y), .A(64'b0), .B(A), .SnA(1'b1));
+RC_ADD_SUB_64 twoscomp64_sub(.Y(Y), .CO(), .A(64'b0), .B(A), .SnA(1'b1));
 
 endmodule
 
@@ -31,7 +31,31 @@ output [31:0] Y;
 //input list
 input [31:0] A;
 
-RC_ADD_SUB_32 twoscomp32_sub(.Y(Y), .A(0), .B(A), .SnA(1'b1));
+RC_ADD_SUB_32 twoscomp32_sub(.Y(Y), .CO(), .A(0), .B(A), .SnA(1'b1));
+
+endmodule
+
+// 32-bit register with parameterized preset pattern
+module REG32_PP(Q, D, LOAD, CLK, RESET);
+parameter PATTERN = 32'h00000000;
+output [31:0] Q;
+
+input CLK, LOAD;
+input [31:0] D;
+input RESET;
+
+wire [31:0] qbar;
+
+genvar i;
+generate
+    for(i=0; i<32; i=i+1)
+    begin : reg32_gen_loop
+       if (PATTERN[i] == 0)
+              REG1 reg_inst(.Q(Q[i]), .Qbar(qbar[i]), .D(D[i]), .L(LOAD), .C(CLK), .nP(1'b1), .nR(RESET));
+        else
+              REG1 reg_inst(.Q(Q[i]), .Qbar(qbar[i]), .D(D[i]), .L(LOAD), .C(CLK), .nP(RESET), .nR(1'b1));
+    end
+endgenerate
 
 endmodule
 
@@ -127,7 +151,19 @@ output [31:0] D;
 // input
 input [4:0] I;
 
-// TBD
+wire [15:0] half;
+wire I_not;
+not I_inv(I_not, I[4]);
+
+DECODER_4x16 d(half, I[3:0]);
+
+genvar i;
+generate
+    for (i = 0; i < 16; i = i + 1) begin : d5_gen
+        and msb0(D[i], I_not, half[i]);
+        and msb1(D[i + 16], I[4], half[i]);
+    end
+endgenerate
 
 endmodule
 
@@ -138,7 +174,19 @@ output [15:0] D;
 // input
 input [3:0] I;
 
-// TBD
+wire [7:0] half;
+wire I_not;
+not I_inv(I_not, I[3]);
+
+DECODER_3x8 d(half, I[2:0]);
+
+genvar i;
+generate
+    for (i = 0; i < 8; i = i + 1) begin : d4_gen
+        and msb0(D[i], I_not, half[i]);
+        and msb1(D[i + 8], I[3], half[i]);
+    end
+endgenerate
 
 
 endmodule
@@ -150,8 +198,19 @@ output [7:0] D;
 // input
 input [2:0] I;
 
-//TBD
+wire [3:0] half;
+wire I_not;
+not I_inv(I_not, I[2]);
 
+DECODER_2x4 d(half, I[1:0]);
+
+genvar i;
+generate
+    for (i = 0; i < 4; i = i + 1) begin : d3_gen
+        and msb0(D[i], I_not, half[i]);
+        and msb1(D[i + 4], I[2], half[i]);
+    end
+endgenerate
 
 endmodule
 

mux.v

@@ -27,7 +27,16 @@ input [31:0] I16, I17, I18, I19, I20, I21, I22, I23;
 input [31:0] I24, I25, I26, I27, I28, I29, I30, I31;
 input [4:0] S;
 
-// TBD
+wire [31:0] x0, x1;
+MUX32_16x1 mux16_0(x0, I0, I1, I2, I3, I4, I5, I6, I7,
+                       I8, I9, I10, I11, I12, I13, I14, I15,
+                       S[3:0]
+);
+MUX32_16x1 mux16_1(x1, I16, I17, I18, I19, I20, I21, I22, I23,
+                       I24, I25, I26, I27, I28, I29, I30, I31,
+                       S[3:0]
+);
+MUX32_2x1 out(Y, x0, x1, S[4]);
 
 endmodule
 

register_file.v

@@ -41,6 +41,30 @@ input [`REG_ADDR_INDEX_LIMIT:0] ADDR_R1, ADDR_R2, ADDR_W;
 output [`DATA_INDEX_LIMIT:0] DATA_R1;
 output [`DATA_INDEX_LIMIT:0] DATA_R2;
 
-// TBD
+wire [31:0] Q [31:0];
+wire [31:0] r_write_sel, r_write;
+DECODER_5x32 d_write(r_write_sel, ADDR_W);
+
+// only write when WRITE=1
+and write_active [31:0] (r_write, r_write_sel, WRITE);
+
+REG32 r[31:0] (Q, DATA_W, r_write, CLK, RST);
+
+wire [31:0] r1, r2;
+MUX32_32x1 mux_r1(r1, Q[0], Q[1], Q[2], Q[3], Q[4], Q[5], Q[6], Q[7],
+                     Q[8], Q[9], Q[10], Q[11], Q[12], Q[13], Q[14], Q[15],
+                     Q[16], Q[17], Q[18], Q[19], Q[20], Q[21], Q[22], Q[23],
+                     Q[24], Q[25], Q[26], Q[27], Q[28], Q[29], Q[30], Q[31],
+                     ADDR_R1
+);
+MUX32_32x1 mux_r2(r2, Q[0], Q[1], Q[2], Q[3], Q[4], Q[5], Q[6], Q[7],
+                     Q[8], Q[9], Q[10], Q[11], Q[12], Q[13], Q[14], Q[15],
+                     Q[16], Q[17], Q[18], Q[19], Q[20], Q[21], Q[22], Q[23],
+                     Q[24], Q[25], Q[26], Q[27], Q[28], Q[29], Q[30], Q[31],
+                     ADDR_R2
+);
+
+MUX32_2x1 mux_out1(DATA_R1, {32{1'bZ}}, r1, READ);
+MUX32_2x1 mux_out2(DATA_R2, {32{1'bZ}}, r2, READ);
 
 endmodule